D5000 Series first UL approvals for United States and Canada

Feb 03, 2016 / by GM International

Topics: GMI Products

D5000 Series lands again on American ground, gaining also UL mark. Electrical safety is guarantee for the whole series, while barriers are obiouvsly covered also through the application of Hazardous Locations requirements, for both Zones and Divisions.
The documents are available for download from the link below.


This news is related to the following products:
  • D5011D - SIL 3 Repeater Power Supply Hart compatible
  • D5011S - SIL 3 Repeater Power Supply Hart compatible
  • D5014D - SIL 3 Repeater Power Supply Hart
  • D5014S - SIL 3 Repeater Power Supply Hart compatible
  • D5020D - SIL 2 Powered Isolating Driver Hart
  • D5020S - SIL 2 Powered Isolating Driver Hart
  • D5030D - SIL 3 Switch/Proximity Detector Repeater, Relay Output
  • D5030S - SIL 3 Switch/Proximity Detector Repeater, Relay Output
  • D5031D - SIL 3 Switch/Proximity Detector Repeater Transistor Output
  • D5031S - SIL 3 Switch/Proximity Detector Repeater Transistor Output
  • D5032D - SIL 3 Switch/Proximity Detector Repeater Relay Output
  • D5032S - SIL 3 Switch/Proximity Detector Repeater Relay Output
  • D5034D - SIL 3 Switch/Proximity Interface
  • D5034S - SIL 3 Switch/Proximity Interface
  • D5090S - 5 A SIL 3 Relay Output Module for NE Load
  • D5090S-086 - 5 A SIL 3 Relay Output Module for NE Load
  • D5091S - 5 A SIL 3 Relay Output Module for ND Load with ND or NE Relay condition
  • D5093D - Loop powered 24 to 220 Vac/Vdc Switch Repeater Transistor Out
  • D5093S - Loop powered 24 to 220 Vac/Vdc Switch Repeater Transistor Out
  • D5290S - 10 A SIL 3 Relay Output Module for NE Load
  • D5290S-078 - 5 A SIL 3 Relay Output Module for NE or ND Loads with NE or ND Relay condition
  • D5290S-078-SA - 5 A SIL 3 Relay Output Module for NE or ND Loads with NE or ND Relay condition for Safe Area Only
  • D5290S-079 - 5 A SIL 3 Relay Out Module (115 Vac coil voltage) for NE or ND Loads with NE Relay condition
  • D5290S-080 - 10 A SIL 3 Relay Output Module for NE Load and 115 Vac coil voltage DIN-Rail
  • D5290S-084 - 5 A SIL 3 Relay Out Module (110 Vdc coil voltage) for NE or ND Loads with NE Relay condition
  • D5290S-SA - 10 A SIL 3 Relay Output Module for NE Load for Safe Area only
  • D5291S - 10 A SIL 3 Relay Output Module for ND Load with ND or NE Relay condition
  • D5293S - 4 A SIL 3 Relay Out Module for NE Load with Load and Line diagnostic
  • D5294S - 4 A SIL 3 NO contact Relay Out Module for NE or F&G/ND Load with open/short circuit diagnostic
  • D5295S - 4 A SIL 3 NC contact Relay Out Module for NE or F&G/ND Load with open/short circuit diagnostic

This news is related to the following certificates: