News

Smart News – October 2020

Written by GM International | Oct 22, 2020

New certifications obtained by GMI products

GMI products have been granted certificates from the most credited Notified Bodies.

Let you keep updated on latest certifications obtained: a new one referred to the Chinese market, then we got the renewal for the Russian one. Our products passed strict audit and tests and the obtained certifications highlight our commitment to quality and safety, allowing our products to be used all over the world.

 

CCC (China Compulsory Certificate) Mark

GMI series D2000, D5000 and PSx1200 obtained the new CCC (China Compulsory Certificate) Mark, the safety mark for many products imported, sold or used in the Chinese market.

 

D2000 Series - ATEX certified, Intrinsically Safe Multiplexer System for acquiring up to 256 Analog and/or 128 Digital Signals from Hazardous Area (Zones 0, 1, 2). Redundancy, RS-232 and RS-485 Modbus Output in Safe Area. General technical features:

  • Proven solution to drastically reduce field wiring and installation costs
  • Up to 256 channels per module and 7.936 channels per system
  • Up to 5 Km from field units to Control Room
  • Redundant field and control room communication lines
  • Optimal communication performance with 115.200 bps baud rate
  • Certified for Zone/Division 1 installation without the need of EX-e or Ex-d enclosures
  • Suitable for operation in -40 to +60 C° temperature range

For more information about D2000 Series and to download CCC certificate click on links: D2010M, D2011M, D2030M, D2050M

 

D5000 Series uses state-of-the-art solutions to achieve the highest performance for Intrinsically Safe Applications. More than 40 SIL3 modules certified by over 15 certification bodies all over the world. General technical features:

  • Slim 12,5 mm modules in single, dual or multi-channel configuration
  • Certified for operation in -40 to +70 C° temperature range
  • Low power consumption and heat dissipation
  • Universal Mounting: DIN-Rail, power bus and termination board
  • 500 Volts of Isolation
  • Marine Type approval
  • G3 coating
  • Certified for 20 years of operation according to IEC 61508:2010 (ed.2)
  • Suitable for Zone/Division 2 installation

For more information about D5000 Series and to download CCC certificate click on links:

D5011D5014D5020D5030D5031D5032D5034D5036, D5037, D5038, D5039, D5040, D5048D5049D5062, D5072, D5090, D5091D5093D5094D5095D5096D5097D5098, D5290D5202, D5212, D5231, D5240, D5244, D5254, D5263, D5264, D5273, D5290, D5291D5293, D5294D5295

 

PSx1200 Series – SIL3 certified power supplies have been designed to provide the greatest levels of availability and safety for high integrity and critical applications. General technical features:

  • SIL 2/SIL 3 certified
  • Third Party SIL 3 Certified according to IEC 61508:2010 (ed.2)
  • Certified for Zone/Division 2 installation
  • Hot-Swappable module for Rack version
  • Suitable for operation in -40 to +70 C° temperature range
  • Guaranteed availability with over and under output voltage protection
  • Remote monitoring feature via RS 485 Mod-Bus and remote/local fault indication
  • G3 coating

For more information about PSx1200 Series and to download CCC certificate click on links: PSW1250, PSS1250, PSD1220, PSS1220-098

 

EAC Certification

GM International D1000 Series and D2000 Series received the renewal for EAC certification for the Russian markets. Our products passed all set procedures of assessment conformity to Customs Union requirements.

 

D1000 Series – intrinsically safe isolators with process measurement field devices situated in a hazardous area of a plant. General technical features:

  • High Density with up to 4 channels in 22.5 mm enclosure
  • Certified for operation in -40 to +60 C° temperature range
  • Standard TS35 mm DIN-Rail and power bus mounting
  • Easy accessible plug-in enclosure
  • 500 Volts of Isolation
  • Marine Type approval
  • G3 coating
  • Certified for 10 years of operation according to IEC 61508:2010 (ed.2)
  • Suitable for Zone/Division 2 installation

For more information about D1000 Series and to download EAC certificates click here and select modules.

 

D2000 Series - For more information about D2000 Series see on top of this page and go to product page on our website. To download EAC certificates click here and select modules.

 

Go to our website for more information and contact our experts for any advices.